Opus IVS highlights common air con problems

Opus IVS, leading provider of diagnostics solutions backed by OE master technicians, say their IVS 360™ support team is now receiving many more calls about air con issues with the mercury finally rising during May after a cool spring.

“It’s a very consistent yearly pattern,” said Tony Gill, Customer Support Manager for UK and ROW at Opus IVS. “The arrival of warm weather and sunshine – which took a while this year – sees motorists turning the air con on again or just noticing that it’s not working when the weather warms.”

Opus IVS highlights five common air con issues to look out for below:

  1. Refrigerant loss and leakage
    Car air con systems permeate refrigerant naturally due to high pressures, vibration and the physical joints in the system. The rate of loss can increase when the system is not used over winter. Pinpointing leaks is often difficult. Opus IVS says hose unit connections are a common culprit. Fixes can include sealants or replacement of o-ring seals or components.
  2. Blocked or damaged condenser

The condenser is located at the front of the vehicle and relies on airflow to remove heat from the refrigerant gas so that condensation occurs back into a liquid state. The placement of the condenser, as well as the small air gaps, make it susceptible to blockage from dust and debris, preventing it from cooling the refrigerant properly.

When blocked, the air con system will blow warm air. Fortunately, the condenser is often easy to visually check. Condensers can also be punctured by stones or suffer pin hole leaks from internal or external corrosion. In these cases, a replacement will be required.

  1. Electrical issues

Electrical issues can be the most difficult problems to diagnose on air con systems. Visually check wires for breaks, insulation damage or corrosion and make a suitable repair or replacement as necessary. Electrical components like fuses, relays, switches and sensors can all become faulty too leading to trouble codes, system failure or intermittent cooling issues.

  1. Faulty fans or blower motors

Electrical condenser fans maintain air flow when the vehicle is stationary. If they don’t function properly the system will start to blow warm air, particularly in hotter ambient conditions. A visual inspection of fan operation should include checking fan blades for cracks or damage which, along with blown fuses, can be a common problem.

The blower motor and fan that circulates air through the vehicle can fail as well. The causes of reduced airflow at the vents could be a motor problem, broken fan blades or motor resistor issues.

  1. Compressor failure

The compressor is at the heart of the air con system, pressurising and circulating refrigerant. Lubricating oil is carried around the system with the refrigerant meaning that long periods where the air con is not used or low refrigerant levels can starve the compressor of oil. Regular use of the air con system is therefore always recommended.

Common signs of a failing compressor include noise, poor cooling, or the air con system not engaging at all. Compressor failure can spread metal debris within the air con system, requiring a thorough system flush before another compressor is fitted.

“Air con work is arriving into garages in greater volumes,” said Tony. “We often find simple checks like these, whilst also referencing diagnostic data such as temperate pressure charts and interpreting high and low side gauge pressure readings will often diagnose problems.”

The Opus IVS 360™ team offers live repair guidance thanks to a team of over 40 brand-specific OE trained master technicians. The aim is to support independent garages by accurately identifying more first-time fixes.

The company’s flagship DrivePro™ Elite is a diagnostic tablet offering a remote services VCI and coverage for 64 brands with IVS 360™ support included.

Garages wishing to find out more can do so now at https://www.opusivs-uk.com/products/mechanical-repair/drivepro-elite-diagnostic-kit/.

Latest Stories